Energy conduit warm roof FPO/PP
NEW
Feed-through of cables/lines through the roof package
Notice
Attention: The processing instructions of the roofing membrane manufacturers must be observed; Materials and material compounds used may be subject to changes
Material
Variants: FPO/PP, PVC and BIT (with a laminated bitumen connection sleeve). The base unit material is modified to be weather-resistant. UV-stabilised, resistant to heat degradation and oxidative ageing as well as cold impact resistant.
Installation
Insert the lower pipe part into the prepared opening in the roof package. Align the vent on the substrate and secure it in position at four points via the holes provided on the edge of the mounting flange. Weld the waterproofing membrane onto the horizontal flange area professionally, according to the roofing membrane manufacturer‘s processing specifications. Feed the cables and lines up through the vent, then thread them through the gooseneck bend. Position the gooseneck bend precisely on the lower part of the vent and press down firmly all around. Finally, check that the gooseneck bend is in the correct position and is fixed securely.
Versions
| Material | Technical details 3 | Pipe length | |
|---|---|---|---|
| FPO/PP 2 similar to RAL 7044, Silk Grey |
Uninsulated | D 75 mm (DN 70) |
Above / below tray 300 / 320 mm 1 |
| D 110 mm (DN 100) |
|||
| D 125 mm (DN 125) |
|||
| D 160 mm (DN 150) |
|||
1 Special lengths available on request
2 Also available in PE (roofing membranes based on PE)
3 Attention: Please note that the visual representation may differ from the illustration
Examples
Technical drawings
Technical data
| H1 (with gooseneck) | 755 mm | 800 mm | 833 mm | 862 mm |
| H2 (without gooseneck) | 617 mm | 617 mm | 617 mm | 617 mm |
| D1 (D Pipe) | D 75 mm (DN 70) |
D 110 mm (DN 100) |
D 125 mm (DN125) |
D 160 mm (DN150) |
| D2 (D Plate) | 300 mm | 380 mm | 380 mm | 380 mm |
| h1 (with gooseneck) | 450 mm | 495 mm | 528 mm | 557 mm |
| h2 (without gooseneck) | 320 mm | 320 mm | 320 mm | 320 mm |
| h | 295 mm | 295 mm | 295 mm | 295 mm |
Available sizes
- D 75 mm (DN 70)
- D 110 mm (DN 100)
- D 125 mm (DN125)
- D 160 mm (DN150)
Special lengths available on request.
Attention: Please note that the visual representation may differ from the illustration.
Packaging units
Delivery in box, PU 1 piece
Downloads
Tailored to meet your requirements
Do you have any questions or require a customised version of this product? Talk to our team of experts! We’ll discuss the available options with you to see how we can help!
Notice
Attention: The processing instructions of the roofing membrane manufacturers must be observed; Materials and material compounds used may be subject to changes
Material
Variants: FPO/PP, PVC and BIT (with a laminated bitumen connection sleeve). The base unit material is modified to be weather-resistant. UV-stabilised, resistant to heat degradation and oxidative ageing as well as cold impact resistant.
Installation
Insert the lower pipe part into the prepared opening in the roof package. Align the vent on the substrate and secure it in position at four points via the holes provided on the edge of the mounting flange. Weld the waterproofing membrane onto the horizontal flange area professionally, according to the roofing membrane manufacturer‘s processing specifications. Feed the cables and lines up through the vent, then thread them through the gooseneck bend. Position the gooseneck bend precisely on the lower part of the vent and press down firmly all around. Finally, check that the gooseneck bend is in the correct position and is fixed securely.
Versions
| Material | Technical details 3 | Pipe length | |
|---|---|---|---|
| FPO/PP 2 similar to RAL 7044, Silk Grey |
Uninsulated | D 75 mm (DN 70) |
Above / below tray 300 / 320 mm 1 |
| D 110 mm (DN 100) |
|||
| D 125 mm (DN 125) |
|||
| D 160 mm (DN 150) |
|||
1 Special lengths available on request
2 Also available in PE (roofing membranes based on PE)
3 Attention: Please note that the visual representation may differ from the illustration
Examples
Technical drawings
Technical data
| H1 (with gooseneck) | 755 mm | 800 mm | 833 mm | 862 mm |
| H2 (without gooseneck) | 617 mm | 617 mm | 617 mm | 617 mm |
| D1 (D Pipe) | D 75 mm (DN 70) |
D 110 mm (DN 100) |
D 125 mm (DN125) |
D 160 mm (DN150) |
| D2 (D Plate) | 300 mm | 380 mm | 380 mm | 380 mm |
| h1 (with gooseneck) | 450 mm | 495 mm | 528 mm | 557 mm |
| h2 (without gooseneck) | 320 mm | 320 mm | 320 mm | 320 mm |
| h | 295 mm | 295 mm | 295 mm | 295 mm |
Available sizes
- D 75 mm (DN 70)
- D 110 mm (DN 100)
- D 125 mm (DN125)
- D 160 mm (DN150)
Special lengths available on request.
Attention: Please note that the visual representation may differ from the illustration.
Packaging units
Delivery in box, PU 1 piece
Downloads
Tailored to meet your requirements
Do you have any questions or require a customised version of this product? Talk to our team of experts! We’ll discuss the available options with you to see how we can help!
Matching accessories
Base element VaporBase for connection to the vapour barrier BIT
NEW
Base element VaporBase for connection to the vapour barrier foil
NEW
Base element VaporBase classic for liquid applied waterproofing
NEW
