Drain Nexo Fix PVC
NEW
Moulded part for vertical drainage through the roof package. Can be installed with a connection to a pipe system for water drainage, or as an extension unit for a roof gully. Ensure appropriate backflow safety.
Notice
Attention: The processing instructions of the roofing membrane manufacturers must be observed; Materials and material compounds used may be subject to changes
Material
Variants: PVC, FPO/PP and BIT for connection to the respective matching material variant of the roofing membrane. The base unit material is modified to be weatherresistant. UV-stabilised, resistant to heat degradation and oxidative ageing as well as cold impact resistant.
Installation
Position the drain in the opening in the roof build-up; if used as an extension unit, connect to the gully below, align on the substrate and secure in position at four points on the substrate via the holes on the tray edge. Professionally weld the connection sleeve to the waterproofing membrane all around in accordance with the roofing membrane manufacturer‘s specifications.
Versions
| Material | Technical details 3 | Membrane connection | |
|---|---|---|---|
| PVC similar to RAL 7035, Light Grey |
Plate D 300 mm, pipe length 320 mm 1,2 |
D 50 mm (DN 50) |
PVC |
| D 75 mm (DN 70) |
|||
| Plate D 380 mm, pipe length 320 mm 1,2 |
D 90 mm | ||
| D 95 mm | |||
| D 110 mm (DN 100) |
|||
| D 125 mm (DN 125) |
|||
| D 160 mm (DN 150) |
|||
1 Special lengths available on request
2 Further diameter sizes available on request
³ Also available with accumulation ring
Examples
Drainage capacity
LGA-certified performance data
| Diameter | Attenuation depth | |
|---|---|---|
| 35 mm | 65 mm | |
| D 50 mm (DN 50) |
3.70 l/s | n/a |
| D 75 mm (DN 70) |
4.60 l/s | 13.20 l/s |
| D 90 mm | 5.30 l/s | 14.60 l/s |
| D 110 mm (DN 100) |
5.55 l/s | 15.80 l/s |
| D 125 mm (DN 125) |
5.55 l/s | 16.00 l/s |
| D 160 mm (DN 150) |
5.60 l/s | 18.60 l/s |
Certifications
The drainage capacity has been tested by TÜV Rheinland LGA (test performed on drain Classic, incl. lip seal).
Technical drawings
Technical data
| D1 (D Pipe) |
50 / 75 mm | 90 / 95 / 110 / 125 / 160 mm |
| D2 (D Plate) |
300 mm | 380 mm |
| l | 320 mm 1 | 320 mm 1 |
| t | 3.5 mm | 3.5 mm |
| Membrane connection (MC) |
L 500 x W 500 mm | L 580 x W 580 mm |
1 Special lengths available on request
Available sizes
- D 50 mm (DN 50)
- D 75 mm (DN 70)
- D 90 mm
- D 95 mm
- D 110 mm (DN 100)
- D 125 mm (DN 125)
- D 160 mm (DN 150)
Further diameter sizes available on request
Packaging units
Delivery in box, PU 1 piece
Downloads
Tailored to meet your requirements
Do you have any questions or require a customised version of this product? Talk to our team of experts! We’ll discuss the available options with you to see how we can help!
Notice
Attention: The processing instructions of the roofing membrane manufacturers must be observed; Materials and material compounds used may be subject to changes
Material
Variants: PVC, FPO/PP and BIT for connection to the respective matching material variant of the roofing membrane. The base unit material is modified to be weatherresistant. UV-stabilised, resistant to heat degradation and oxidative ageing as well as cold impact resistant.
Installation
Position the drain in the opening in the roof build-up; if used as an extension unit, connect to the gully below, align on the substrate and secure in position at four points on the substrate via the holes on the tray edge. Professionally weld the connection sleeve to the waterproofing membrane all around in accordance with the roofing membrane manufacturer‘s specifications.
Versions
| Material | Technical details 3 | Membrane connection | |
|---|---|---|---|
| PVC similar to RAL 7035, Light Grey |
Plate D 300 mm, pipe length 320 mm 1,2 |
D 50 mm (DN 50) |
PVC |
| D 75 mm (DN 70) |
|||
| Plate D 380 mm, pipe length 320 mm 1,2 |
D 90 mm | ||
| D 95 mm | |||
| D 110 mm (DN 100) |
|||
| D 125 mm (DN 125) |
|||
| D 160 mm (DN 150) |
|||
1 Special lengths available on request
2 Further diameter sizes available on request
³ Also available with accumulation ring
Examples
Drainage capacity
LGA-certified performance data
| Diameter | Attenuation depth | |
|---|---|---|
| 35 mm | 65 mm | |
| D 50 mm (DN 50) |
3.70 l/s | n/a |
| D 75 mm (DN 70) |
4.60 l/s | 13.20 l/s |
| D 90 mm | 5.30 l/s | 14.60 l/s |
| D 110 mm (DN 100) |
5.55 l/s | 15.80 l/s |
| D 125 mm (DN 125) |
5.55 l/s | 16.00 l/s |
| D 160 mm (DN 150) |
5.60 l/s | 18.60 l/s |
Certifications
The drainage capacity has been tested by TÜV Rheinland LGA (test performed on drain Classic, incl. lip seal).
Technical drawings
Technical data
| D1 (D Pipe) |
50 / 75 mm | 90 / 95 / 110 / 125 / 160 mm |
| D2 (D Plate) |
300 mm | 380 mm |
| l | 320 mm 1 | 320 mm 1 |
| t | 3.5 mm | 3.5 mm |
| Membrane connection (MC) |
L 500 x W 500 mm | L 580 x W 580 mm |
1 Special lengths available on request
Available sizes
- D 50 mm (DN 50)
- D 75 mm (DN 70)
- D 90 mm
- D 95 mm
- D 110 mm (DN 100)
- D 125 mm (DN 125)
- D 160 mm (DN 150)
Further diameter sizes available on request
Packaging units
Delivery in box, PU 1 piece
Downloads
Tailored to meet your requirements
Do you have any questions or require a customised version of this product? Talk to our team of experts! We’ll discuss the available options with you to see how we can help!
Matching accessories
Gravel frame for roof drains
Gravel guard Vario Fix – continuously adjustable
Lip seal as backflow-proof pipe connection
Similar products
Drain BIT
Drain PVC
Drain FPO/PP
Drain Nexo Fix FPO/PP
NEW